NORLYS

Bollard Light NORLYS Halmstad 1356BL black with wood LED 8.5 W 4000 K 85 cm

Name: Bollard Light NORLYS Halmstad 1356BL black with wood LED 8.5 W 4000 K 85 cm
Brand: NORLYS

Halmstad 1356BL is a bollard light with a square 12 × 12 cm section, standing 85 cm tall. The body is painted Scandinavian pine, and the steel parts are hot-dip galvanised and then powder-coated black (RAL 9005). The head carries horizontal louvres with an opal PMMA diffuser glowing behind them. What kind of light it gives The built-in Philips Fortimo LED module draws 8.5 W. The source produces 1121 lm, but 310 lm leave the luminaire, because the louvres and the opal diffuser hold part of it back. That is orientation light: the bollard marks the line of a path, the edge of a terrace or an entrance, but it will not light the whole garden. The light is open and only partly shielded from above, so it spreads mainly sideways. 47% of the output goes above the horizontal (ULOR) – where rules limit light emitted towards the sky, check this figure. 4000 K means neutral white light, and CRI 80 is the colour rendering typical of outdoor lighting. Installation, wiring and dimming The bollard is bolted down through three ø9 mm holes set 120° apart on a 65 mm circle. Nothing for fixing it into the ground is in the box: Norlys sells the concreting anchor 205ZX0010, the ground anchor 206GA0010, the concrete-foundation adapter 206GA0S10 and the mounting adapters 3086GA0009 and 3080GA0009 separately. The terminals take conductors up to 2 × 4 mm² and let the supply loop on to the next fitting, so several bollards along one path can run from a single circuit. The cable may be up to 12.5 mm in diameter. The luminaire is Class II and needs no protective earth. It dims on a TRIAC phase dimmer, either trailing edge or leading edge. Durability and service IP65 lets the bollard stand outdoors with no shelter, and the manufacturer rates it for ambient temperatures from −20 to +45 °C. For the LED module it quotes L70 above 50,000 hours – after which it still gives at least 70% of its initial output; the driver is rated for 50,000 hours. A professional service replaces the light source and control gear using repair kit ZS1356zx0009. Norlys intends Halmstad for private grounds and other architectural projects. To order it builds versions in protection Class I, at 2700 K, with surge protection, in another RAL colour or at another height.Meer tonen

vanaf € 625,56

1 aanbieding

Bekijk aanbiedingen