LED Labs

LED strip PRO 3Y 24V 280 LED/m 2835 SMD Neutral White 25W, 1400 LEDs, 5 m

Name: LED strip PRO 3Y 24V 280 LED/m 2835 SMD Neutral White 25W, 1400 LEDs, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape of this series is equipped with Blue Tape mounting tape. Neutral white color LED tape with neutral white color allows you to get more light. This is the color that is most similar to daylight. Even a long stay in a room illuminated by a neutral-colored light source is not tiring to the eyes. This makes the tape universally applicable, it will work in virtually any room. Voltage 24V - lower voltage drops When installing longer lengths of LED tape, it is worth choosing a tape with a voltage of 24V. This will reduce voltage drops that could occur when installing 12V tape. In addition, thinner wires can be used to mount the 24V tape, allowing it to be more easily hidden during installation. See the colors in their natural shades Depending on the lighting, objects can have different colors. How close the colors of the illuminated object are to those seen in daylight is determined by the CRI parameter. A value above 80 allows for true color rendering, which means more vivid colors of food, clothing and other objects. 1400 LED 2835 SMD tape The visible points of light in the LED tape are the result of the spot arrangement of LEDs. The more LEDs are on the tape, the more uniform light we will get. A characteristic feature of the tape 1400 LED 2835 SMD 25W is the presence of two rows of LEDs, which gives us up to 1400 LEDs in a section of 5m. Another advantage is the presence of mounting holes, so that the tape can be easily attached with screws. IP20 LED tape IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. Requires installation of a power supply The installation of a LED lighting system based on LED strips requires the installation of a power supply allowing to reduce the mains voltage to 12 or 24V, depending on the LED strips used. When designing LED lighting, it is worth remembering that the power supply is an integral part of the whole system, the smooth functioning of which is related not only to the selection of a professional LED strip, but also a reliable LED power supply. Installation of power supplies is done in invisible places, often difficult to access, so it is very important that when choosing an LED power supply, make a choice that allows for many years of operation. The choice of power supply depends on the power of the LED strip, its voltage and the length of the installation. You should also pay attention to the shape and size of the power supply to ensure the most convenient installation. Why choose a professional version of LED tape ? Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is more than twice the life of the tape. Another advantageous feature of professional tapes is their repeatability. Deciding to install professional LED tape, we are almost 100% sure that each roll of tape will have the same color and light output.