LED Labs

LED strip PRO 3Y 24V 840 LED/m COB 15W RGB, 4200 LEDs, 5 m

Name: LED strip PRO 3Y 24V 840 LED/m COB 15W RGB, 4200 LEDs, 5 m
Brand: LED Labs

A distinctive feature of the tape is the use of COB (Chip on Board) diode in it. The use of COB technology makes it possible to achieve a uniform line of light even with the lowest LED profiles. An additional advantage of using COB LED in LED strips is a wider angle of light dispersion and high light efficiency. COB LEDs emit a far superior beam of light compared to older LED technologies at lower power consumption. The 3Y series of LED strips is a line of products designed for professionals. LED 3Y strips are branded by LED Labs Lighting and come with an extended warranty period. LED strips with an IP rating of 20 are subject to a five-year warranty period. Thanks to the use of a 3oz copper PCB backing, it was possible to significantly increase their lifespan. The 3Y series also means noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. RGB LED Tape Discover the possibilities of LED tapes with the RGB color palette. Choose any color and create an amazing atmosphere in any room. RGB LED tape can be used as a decorative element in the living room, bathroom or children's room. RGB tape requires the installation of an LED driver. IP20 LED strip IP20 LED strips are strips that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip. LED strips 24V - lower voltage drops The choice of LED strips with 24V drive is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows you to lay longer sections of LED tape without the risk of voltage drops at the ends of the tape sections. Thanks to lower current consumption, 24V LED strips also allow the use of smaller wires, which can be helpful in designing installations. This allows the wires to be more easily hidden. LED 24V strips are increasingly popular in the market. 4200 LED COB strip The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light will be obtained. Thanks to the use of COB (chip on board) LEDs, the greater number of LEDs and the emission of a better beam of light is not associated with higher power consumption compared to SMD tapes. Requires the installation of a power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).