LED Labs

LED strip PRO 3Y 300 LED 5050 SMD 12W RGB+CCT, 5 m

Name: LED strip PRO 3Y 300 LED 5050 SMD 12W RGB+CCT, 5 m
Brand: LED Labs

The 3Y series of LED tapes are tapes with an increased warranty period. For IP65 and IP65HS tapes it is 3 years, for IP20 tapes it is up to 5 years warranty! In addition, the 3Y series tapes are characterized by lower voltage drops due to the 3oz copper PCB backing used. The tapes have double-sided Blue Tape mounting tape. RGB+CCT LED Tape LED RGB + CCT tape is a tape with which you can completely change the atmosphere of the room. The tape allows you to choose a color from the RGB color palette or warm or cold white light. It is used in spaces where you want light in different shades, having the ability to turn on white lighting. It can be used in the living room, on the media wall, in a child's room, as a gaming desk backlight. IP20 LED strip IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The lack of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. 300 LED 5050 SMD tape The 5050 diode is a diode with a larger size than the common 3528 and 2835 diodes.Density is one of the parameters that characterize the LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape is placed and the lampshade. Tapes with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires a low 12V DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply. Requires installation of LED driver To install RGB+CCT LED strip, you need a driver. With it, it is possible to change the color from the RGB color palette or select the color temperature. When choosing a driver, voltage is an important parameter (the driver is mounted between the power supply and the LED strip). Why choose a professional version of LED tape ? Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is more than twice the life of the tape. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).