LED Labs

LED strip PRO 3YB 24V 2835 SMD Cold White, 12W , 600 LEDs, 5 m

Name: LED strip PRO 3YB 24V 2835 SMD Cold White, 12W , 600 LEDs, 5 m
Brand: LED Labs

LED Basic tapes are a series of LED Labs Lighting brand tapes with a 3-year warranty. The 3Y Basic tape series is built on selected, reliable 2835 SMD, 5630 SMD LEDs. Cold white color The light of the tape with a cold white color introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. LED strips 24V - lower voltage drops Thanks to the voltage of 24V we can connect up to twice as long sections of LED tape when connecting in series than it is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. See the colors in their natural shades High CRI value guarantees the highest quality of colors of illuminated objects. The higher the value of the parameter, the more natural the appearance of the objects. The use of tape with a CRI of more than 80 allows to reflect the true color of objects in the room where the LED tape was used. Tape 600 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. It is a more powerful alternative to the 3528 LED. The density of LED strips indicates the number of LEDs per meter of LED strip.. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more LEDs the more often we can cut the tape. LED tapes with a density of 120 LED/m are tapes that allow you to get uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. IP20 LED strips IP20-rated LED strips are covered with a thin protective layer, which protects them from the effects of fine dirt. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. Requires installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. Tapes for 24V need a power supply with an output voltage of 12V (24V). Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.