LED Labs

LED Strip PRO 3YB 2835 SMD Neutral White, IP65HS, 6W, 300 LEDs., 5 m

Name: LED Strip PRO 3YB 2835 SMD Neutral White, IP65HS, 6W, 300 LEDs., 5 m
Brand: LED Labs

LED Basic tapes are a series of LED Labs Lighting brand tapes with a 3-year warranty. The 3Y Basic tape series is built on selected, reliable 2835 SMD, 5630 SMD LEDs. Neutral white color Neutral color is the closest to sunlight. It will find use wherever our eyes are forced to strain: at work, in the office in the home premises. It is the most versatile light color. LED tape for use in areas exposed to moisture Often an increase in the degree of waterproofness is accompanied by a decrease in the brightness of the LED tape. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a shrink wrap was used to tightly cover the tape. This makes it possible to maintain IP65 waterproofing and high light performance of the LED strip. See the colors in their natural shades High CRI value guarantees the highest quality of colors of illuminated objects. The higher the value of the parameter, the more natural the appearance of the objects. The use of tape with a CRI of more than 80 allows to reflect the true color of objects in the room where the LED tape was used. Tape 300 LED 2835 SMD The type of LED is an important indicator in the selection of LED tape. It directly relates to the size of the LED used in the LED strip. The first term stands for the width, and the second for the width of the LED used. The 2835 diode is a small size diode, which is a more powerful version of the 3528 diode. Depending on the density of the LED strip, it will work well in most applications. The density of LED strips tells you the number of LEDs per meter of LED strip. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more LEDs the more often we can cut the tape. Tapes with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 12V tapes need a power supply with 12V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation. LED drivers - more control over light Control LED strips in a convenient way: by hand movement, voice or remote control. Drivers allow you to take advantage of all the possibilities offered by LED technology. The controller can be placed in the profile, where it allows control by a button or motion sensor. It can also be hidden with the power supply and controlled by radio waves. There are also WiFI controllers that allow voice control with voice assistants and using android and iOS devices. The possibilities are almost endless.