LED Labs

LED strip PRO 5Y 24V 320 LED 2835 SMD 6W 2700K RA90, 5 m

Name: LED strip PRO 5Y 24V 320 LED 2835 SMD 6W 2700K RA90, 5 m
Brand: LED Labs

LED strips 5Y series are professional LED strips. They are distinguished by their high CRI color rendering index. The tapes allow to obtain a line of light of uniform color, thanks to a low dispersion of color temperature. They come with as much as a 7-year warranty. They are mounted on a 3oz PCB substrate, which minimizes voltage drops. The LED strips have Tesa 4965 mounting tape. Ultra warm white color Ultra warm color tape is used as decorative lighting, bringing a cozy touch to the room. It can be used as accent lighting for shelves and furniture. IP20 LED strip IP20-rated LED strips are covered with a thin protective layer, which protects them from the effects of fine dirt. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. 320 LED 2835 SMD tape LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Tape density is the number of diodes on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. Strips with a density of 64 LED/m are strips that allow for uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. LED strips 24V - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. Requires installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.