LED Labs

LED tape 120LED/m 2835 SMD Neutral White 50m, 5 m

Name: LED tape 120LED/m 2835 SMD Neutral White 50m, 5 m
Brand: LED Labs

They are covered by a two-year warranty period. LED strips are a solution that will work in almost any space. The use of LED strips can serve a typically decorative function or be the main source of light in complex LED lighting systems. Illuminating the darkened space under kitchen cabinets is one of the standard designs that allow the use of a low-voltage LED light source. They allow illumination of hard-to-reach workspaces under countertops or interior finishes. LED strips are a quick and easy way to provide additional lighting to any space. Neutral white color Neutral white color is the most universal color of light. It can be used in any room. Light of this color is the least tiring to the eyes, so it can be used in rooms where we stay for a long time - in the apartment or in the office. See the colors in their natural shades The CRI parameter determines how the light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, close to how they appear when exposed to daylight emission. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the effect of daylight. The use of LED strips with a CRI above 80 allows for more natural and pleasant color reproduction on the illuminated objects. IP20 LED strip that is not protected against water and particles. The tape should not be used in areas with high humidity. Required power supply The LED strip requires a low DC power supply of 12V. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.Meer tonen