Lindy 70m Cat.6 HDMI 4K60, IR and RS-232 HDBaseT UK Wall Plate vanaf € 196,71 | css.shopping
Lindy
Lindy 70m Cat.6 HDMI 4K60, IR and RS-232 HDBaseT UK Wall Plate
The Lindy Cat.6 HDBaseT HDMI 4K60 Wall Plate Transmitter is one part of a high performance, reliable solution for extending HDMI signals over long distances via Cat.6 network cable. By combining this Transmitter unit with a compatible HDBaseT Receiver such as Lindy No. 38214 and 38342, this solution ensures reliable transmission up to 70m. The following distance and resolution combinations are possible when using high quality Cat.6 or above U/UTP or F/UTP cable: 70m: 1920x1080@60Hz 4:4:4 8bit40m: 3840x2160@60Hz 4:4:4 8bit / 4:2:2 12bit Supporting resolutions up to 4K Ultra HD, video can be viewed in stunning clarity, while additional support for HDR (High Dynamic Range) allows content to be displayed with enhanced brightness, greater contrasts of blacks and whites and a much wider colour gamut. This provides a reliable solution for creating eye-catching digital signage in retail, immersive displays at events or engaging setups in larger conference rooms or lectures halls. PoC (Power over Cable) functionality with On/Off switch provides additional flexibility. This allows power to be supplied alongside data through Cat.6 network cable in a point to point connection between the transmitter and receiver, meaning only a single power supply is required at one side of the installation. Featuring bi-directional IR ports at both sides of the setup, the source equipment can be easily controlled from the display side, and the display can also be controlled from the HDMI source side. This extension system allows for complete and simple control for the user providing also RS-232 port via terminal block on the rear side of the wall plate. HDBaset is a globally recognised standard for high quality distribution of AV content and other technologies, including power and control, over longer distances via low cost Cat.6 or above cable. HDBaseT and the HDBaseT Alliance logo are trademarks of the HDBaseT Alliance. Please Note: the quoted lengths and resolutions are possible with a direct connection between Transmitter and Receiver using good quality Cat.6 or above cable. Using a different cable type, introducing couplers or patch panels may result in a reduction of possible distances. Technical details Special features: Bi-directional IR, PoC Warranty period: 2 year(s) Compliance certificates: CE, Federal Communications Commission (FCC), RoHS, UKCA Sustainability compliance: Yes Ports & interfaces Connectivity technology: Wired RJ-45 output ports: 1 HDBaseT port: Yes HDMI in: 1 HDMI version: 2.0 RS-232 output ports: 1 3.5 mm (1/8-inch) in: Yes 3.5 mm (1/8-inch) out: Yes Weight & dimensions Width: 86 mm Depth: 38 mm Height: 86 mm Weight: 390 g Power Power source type: DC Operating voltage (transmitter): 24 V Output current: 1 A Power requirements: 24VDC 1A Operational conditions Operating temperature (T-T): 0 - 40 °C Storage temperature (T-T): -20 - 60 °C Operating relative humidity (H-H): 20 - 90% Packaging data Quantity per pack: 1 pc(s) Package width: 152 mm Package depth: 95 mm Package height: 133 mm Package weight: 540 g Package type: Box Packaging content Manual: Yes Packaging content: HDMI Transmitter Multi-country Power Supply (UK, EU, US & AUS) IR Emitter Cable, 1.5m IR Receiver Cable, 1.5m 3-Pin Terminal Block 2-Pin Terminal Block Lindy Manual Features Type: AV transmitter Maximum resolution: 3840 x 2160 pixels Cable types supported: Cat6 Maximum transfer distance: 70 m Chipset: VS010 Maximum refresh rate: 60 Hz Extended display identification data (EDID): Yes RS-232 pass-through: Yes Bidirectional: Yes Infrared (IR) frequency range: 20 - 60 kHz Bandwidth: 18 Gbit/s On/off switch: Yes HDCP: Yes Material: Metal Wall mountable: Yes HDCP version: 2.2 Product colour: Black, White Certification: California Proposition 65Meer tonenMinder tonen
