Lumines

MiBoxer CONTROLLER 12-24V 12A RF RGB+CCT

Name: MiBoxer CONTROLLER 12-24V 12A RF RGB+CCT
Brand: Lumines

MiBOXER receiver allows you to control LED tape. The connection between the receiver and the remote control is made using 2.4GHz radio waves. The receiver is mounted between the LED strip and the power supply, so it can be added at any stage of the strip installation. Diagram of the connection of LED power supply, driver and LED tape The receiver allows you to control the RGB+CCT LED strip. The receiver can be paired with a MiBOXER series remote control or, when paired with a Wi-Fi gateway, expand the receiver's capabilities to include app-based or voice control. After adding the Wi-Fi gateway, it is possible to control the lighting using Android and IOS devices. This allows you to adjust the lighting to the rhythm of the day and remotely control it from anywhere. It is also possible to control lighting with the Google Assistant and Amazon Alexa voice assistants. Different receiver models can work together synchronously. They must be controlled from the same device, in the same dynamic mode and from a distance of no more than 30m. The devices are characterized by the ability to transmit the signal from the receiver to the next device, increasing the range of the. Signal transmission is possible when the distance between consecutive devices is less than 30m. Possibility of signal transmission and synchronization Pairing the remote control with the receiver is extremely easy. Perform the action of disconnecting the main power supply from the receiver (1), and then reconnect the power supply, where in the first 3 seconds briefly hold the previously selected channel on the remote control (2) respectively. The result of the correct pairing of the devices will be the blinking of the LED strip (3) three times. Diagram of pairing the receiver with the remote control Dimensions 74.5x36x17mm Voltage DC 12V-24V Working range ~30m Operating current 6A per channel Maximum load 12A Frequency 2.4 GHz Wi-Fi control with Wi-Fi gateway Output connection common anode Autotransmission yes Signal synchronization yesMeer tonen