PRO 3YB 12V 1600 LED COB 8W NW tape - 25m, 5 m vanaf € 149,78 | css.shopping
LED Labs
PRO 3YB 12V 1600 LED COB 8W NW tape - 25m, 5 m
LED Basic tapes are a series of LED Labs Lighting brand tapes with a 3-year warranty. The 3Y Basic tape series is built on selected, reliable 2835 SMD, 5630 SMD LEDs. A characteristic feature of COB LED tape, is the use of a special COB (Chip on Board) diode in it.. The use of COB technology makes it possible to achieve a uniform line of light even with the lowest LED profiles. COB LEDs emit a uniform line of light compared to older LED technologies with lower power consumption. Neutral white color Neutral white LED strip allows more light to be produced. This is the color that is most similar to daylight. Even a long stay in a room illuminated by a neutral-colored light source is not tiring to the eyes. This makes the tape universally applicable, it will work in virtually any room. IP20 IP20 LED strips are the most commonly used LED strips. Wherever there is no exposure to moisture and water, they are the choice to guarantee a long life. The lack of a cover to reinforce waterproofing affects the better dissipation of heat from the LED strip, which translates into the life expectancy of the LED strip. LED strip in IP20 waterproof strips can perfectly cope with dust and dry dirt thanks to the protective layer coating the LEDs. See the colors in their natural shades CRI tells you how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Required power supply LED tape requires the installation of a power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED stripMeer tonenMinder tonen
Aanbieding
Lunares.eu
OUT_OF_STOCK · Verzending: ?Levering uit 🇩🇪 DE → 🇳🇱