LED Labs

PRO 3YB 12V 1600 LED COB 8W NW tape, 5 m

Name: PRO 3YB 12V 1600 LED COB 8W NW tape, 5 m
Brand: LED Labs

LED Basic tapes are a series of LED Labs Lighting brand tapes with a 3-year warranty. The 3Y Basic tape series is built on selected, reliable 2835 SMD, 5630 SMD LEDs. A uniform line of light in your home! Thanks to the increased number of diodes, it is possible to achieve a uniform line of light even when using a low D, Z, or SOLIS type aluminum profile. COB LEDs, compared to older technologies, emit a uniform line of light. And all this while maintaining low power consumption. Neutral white color LED strip intended for use as an element of the main lighting of rooms, for the construction of LED fixtures, to highlight exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. IP20 IP20 strips are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The absence of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. Power supply required LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. The 12V (24V) tapes need a power supply with an output voltage of 12V (24V). Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.Meer tonen