KLUŚ
Profile for LED strips PDS-NK Silver anodized e6-k1 3m Kluś
The PDS-NK LED profile is designed so that its inlet edge remains invisible. The product has a small bend radius. A wide range of accessories distinguishes this model from other profiles for LED strips. The main purpose of the product is furniture, main and decorative lighting. The LED profiles are mounted in grooves, using mounting adhesives or double-sided adhesive tape. The profile cover is cut to the length of the profile. The modern PDS-NK profile fits in a plasterboard thickness of 12 mm (after cutting the plasterboard, the profile does not protrude above it). Dimension of the mounting channel for the PDS-NK LED profile in the furniture board: 18 mm (width) x 13 mm (depth). The line of light can be obtained by using the product with a LIGER cover and a LED strip with a minimum quantity of 120 LEDs. The bottom of the profile is 14.2 mm wide, which makes it possible to use RGBW stripes. Profile bending The minimum internal radius - 150 mm, the minimum external radius - 250 mm. minimum radius - bending radius, the exceeding of which causes damage (deformation, kink) of the profile or the profile does not work with accessories, covers, plugs, etc., inner radius - applies to a profile bent so that the cover is inside the arch, outer radius - applies to a profile bent so that the cover is located on the outside of the arch, irregular curves are possible after consultation and individual valuation, when bending anodized profiles, one should take into account the cracking of the anodic coating (which, depending on the radius, may be more or less visible),Meer tonen
Aanbieding
Alle prijzen incl. btw; verzendkosten volgens de feed van de shop. De klik leidt direct naar de productpagina van de shop.
Prijsverloop (laagste prijs)
2026-07-23 – 2026-07-24min € 18,00 · max € 18,00
Productdetails
- Merken
- KLUŚ
- GTIN
- 05902280328087