LED Labs

Tape PRO 3Y 12V 300 LED 2835 SMD 4.8W NW RA90, 5 m

Name: Tape PRO 3Y 12V 300 LED 2835 SMD 4.8W NW RA90, 5 m
Brand: LED Labs

The 3Y series of LED tapes are tapes with an increased warranty period. For IP65 and IP65HS tapes it is 3 years, for IP20 tapes it is up to 5 years warranty! In addition, the 3Y series tapes are characterized by lower voltage drops due to the 3oz copper PCB backing used. The tapes have double-sided Blue Tape mounting tape. Neural white color Neural white LED tape allows for more light. This is the color that is most similar to daylight. Even a long stay in a room illuminated by a neutral-colored light source is not tiring to the eyes. This makes the tape universally applicable, it will work in virtually any room. LED tape IP20 IP20 LED tapes are tapes that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 300 LED 2835 SMD LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape and the lampshade are placed. Tapes with a density of 60 LEDs per meter make it possible to achieve a line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED strip