LED Labs

Tape PRO 3Y 24V 350 LED 2835 SMD 6W NW RA90 HS., 5 m

Name: Tape PRO 3Y 24V 350 LED 2835 SMD 6W NW RA90 HS., 5 m
Brand: LED Labs

LED strips 3Y have an extended warranty period. 3 year warranty for IP65HS and IP65 tapes and 5 years for IP20 tapes. 3Y tapes also mean lower voltage drops in the created light installation. Each LED strip in the 3Y series comes with Blue Tape mounting tape. Neutral white color Neutral color is the color that is most similar to sunlight. This is the most versatile color of LED strips, which can be used both in domestic spaces and workplaces. Such light is not tiring to the human eye. Neutral LED tape is also a good solution for office lighting. The color neutral white is ideal for rooms where we spend a lot of time. IP65HS LED strip Often an increase in the degree of waterproofness is accompanied by a decrease in the brightness of the LED strip. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a shrink wrap was used to tightly cover the tape. This makes it possible to maintain IP65 waterproofing and high light performance of the LED strip. LED strips 24V - lower voltage drops When installing longer lengths of LED tape, it is worth choosing a tape with a voltage of 24V. This will reduce voltage drops that could occur when installing 12V tape. In addition, thinner wires can be used to mount the 24V tape, allowing it to be more easily hidden during installation. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 350 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape and the lampshade are placed. Tapes with a density of 70 LEDs per meter make it possible to achieve a line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Requires LED driver RGB LED strips need a LED driver to work properly