LED Labs

Tape PRO 3Y 24V 700 LED 2835 SMD 12W WW RA90 -25m, 5 m

Name: Tape PRO 3Y 24V 700 LED 2835 SMD 12W WW RA90 -25m, 5 m
Brand: LED Labs

The 3Y series of LED tapes are tapes with an increased warranty period. For IP65 and IP65HS tapes it is 3 years, for IP20 tapes it is up to 5 years warranty! In addition, the 3Y series tapes are characterized by lower voltage drops due to the 3oz copper PCB backing used. The tapes have double-sided Blue Tape mounting tape. Warm white color The color of LED tapes warm white is a very popular choice among end users looking for solutions to install lighting in residential spaces. Thanks to the soft, warm light, this color of LED tape, is ideal for lighting rooms for daily rest and relaxation. Objects and surroundings illuminated with LED tape of such a selected color give the impression of coziness and warmth. IP20 LED tape IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. Voltage 24V - lower voltage drops When installing longer lengths of LED tape, it is worth choosing a tape with a voltage of 24V. This will reduce voltage drops that could occur when installing 12V tape. In addition, thinner wires can be used to mount the 24V tape, allowing it to be more easily hidden during installation. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 700 LED 2835 SMD LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light you will get.LED tapes with a density of 140 LED/m are tapes that allow you to get uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.