Sigma

Wall Lamp Sigma Andy Black G9 LED Sconce 33290

Name: Wall Lamp Sigma Andy Black G9 LED Sconce 33290
Brand: Sigma

Sigma Andy 33290 — a black wall light framed around one white globeAndy uses a small set of shapes to make a clearly defined wall feature. A round black backplate supports an upright member and a short horizontal arm in painted steel. One spherical shade in white glass hangs directly beneath the arm. The globe remains fully visible rather than being enclosed by the frame, so it becomes the visual centre of the fitting; the black metal forms a crisp right-angled outline above and beside it. This balance of a pale curved volume and dark straight lines suits schemes that call for compact lighting with a graphic rather than ornate character.Dimensions and exact 33290 specificationoverall size: 14 × 19 × 23 cm (depth × width × height),one white glass shade with a stated shade dimension of 14 cm,one holder for a replaceable G9 LED lamp,manufacturer’s stated maximum rating: 12 W,230 V supply, IP20 rating and net weight of 0.7 kg,the light source is not included.A replaceable lamp leaves the choice of colour temperature and lumen output with the buyer. Check the G9 cap, permitted wattage and the bulb’s physical length and diameter before ordering, as the source must fit within the spherical shade. The white glass conceals a direct view of the bulb and, when switched off, keeps attention on the simple contrast between the globe and its black support.Planning position and installationAt 19 cm wide with a 14 cm projection, Andy can be considered beside a mirror, at either side of a bed, above a narrow cabinet or as a repeated point along a hallway. A pair can frame a chosen furnishing or wall feature without introducing a large structure. Before drilling, account for the 23 cm overall height, the location of the cable outlet and sufficient access to handle the glass shade when the lamp eventually needs replacement. The fitting attaches to the wall with a mounting bracket. The supplied diagram illustrates fixing that bracket, connecting the conductors and placing the circular cover over the assembly. Connection work must be completed with the supply isolated and adapted to the actual circuit by a suitably qualified installer.Meer tonen