partworks

Instrument cluster gear for ROLLS ROYCE Silver Seraph Corniche VDO 20x29

Name: Instrument cluster gear for ROLLS ROYCE Silver Seraph Corniche VDO 20x29
Brand: partworks

Instrument cluster gear for ROLLS ROYCE Silver Seraph Corniche VDO 20x29 Excellent workmanship quality Description: If the odometer/trip meter has failed on your vehicle, this gear is usually the cause. The original beige-brown gears crumble over the years and need to be replaced. Variants: We can say with great certainty, but not with 100% certainty, which model has which gear size. Too many influencing factors come into play here (engine type/gearbox type/year of manufacture/model). However, the following data reliably helps to determine the right gear: Variants of this double gear for VDO speedometers: 20x21 (17.60mm/9.00mm) Number of teeth of the opposite partner gear: 49 teeth 20x22 (17.60mm/9.40mm) Number of teeth of the opposite partner gear: 48 teeth 20x23 (17.60mm/9.65mm) Number of teeth of the opposite partner gear: 47 teeth 20x29 (17.60mm/12.05mm) Number of teeth of the opposite partner gear: 41 teeth 20x30 (17.60mm/12.55mm) Number of teeth of the opposite partner gear: 40 teeth 20x32 (17.60mm/13.40mm) Number of teeth of the opposite partner gear: 38 teeth If in doubt, simply count the teeth of the gear into which the smaller gear engages. Services: We have over 100 gear variants in our range and can supply the right gears if required! + all alternative sizes always in stock + fast exchange service in the event of a size discrepancy For the repair, we will send you illustrated repair instructions (German/English) by email. Advantages: Buying a used speedometer saves you from having to repair it initially, but carries the risk that the gear will break in the near future. Storage times and cold temperatures in particular cause additional damage to the gears. Due to incorrect material choice by VDO, all original gears of this type will break over time! If you have dismantled the speedometer, we also recommend replacing the light bulbs. These noticeably lose performance over the years. Quality: Our gears are elaborately and faithfully manufactured using injection molding and are not self-made 3D printed products. We work with a manufacturer that specializes in the production of plastic gears and is the global market leader with its repair solutions. The so-called involute tooth geometry is retained; this is the only way to ensure low-friction sliding of the tooth flanks between the pairs of gears. The material we use is the thermoplastic Celron with graphite additives. These ensure low friction and wear-free operation. If you disassemble the speedometer in advance, please note that the shaft of the speedometer needle is very sensitive. Grab the speedometer needle in the middle and turn it counterclockwise. Pull lightly. Friction is everything that keeps the needle on the shaft. Brand information: partworks GmbH is a German company that specializes in reverse engineering and the distribution of spare parts for Porsche. Particular emphasis is placed on high quality and excellent service. More than 130,000 car fans worldwide are already satisfied customers of the Paderborn-based company. As a specialist company for classic car spare parts, we are aware of the quality requirements of our customers. Therefore, when it comes to subsequent developments, you can be sure that the requirements are very close to the original and in some cases even exceed them. With our own engineering department and internal testing, we can ensure the reliability of our products. Last but not least, our DIN ISO 9001 certified quality management confirms the thoroughness of our work. If you see the manufacturer information partworks, it means either an in-house development or an item from the original manufacturer (OE quality). Original equipment manufacturers are those manufacturers who have supplied the original product to the vehicle manufacturer but cannot be active in free trade under their own brand. Additional information: &#9679 Diameter: 12.05/17.6mm &#9679 Number of teeth: 20 &#9679 Number of teeth: 29 Reference numbers: UD24872B4 UD20162 Scope of delivery: 1 gear Suitable for: RR Silver Spirit with VDO speedometer and digital speedometer drive (no speedometer cable) RR New Silver Spirit with VDO speedometer and digital speedometer drive (no speedometer cable) RR Silver Spur with VDO speedometer and digital speedometer drive (no speedometer cable) RR Silver Seraph with VDO speedometer and digital speedometer drive (no speedometer cable) RR Corniche with VDO speedometer and digital speedometer drive (no speedometer cable) Only vehicles with a kilometer speedometer. Mileage speedometers have a 20x23 installed. We can do so with great certainty but cannot say with 100% certainty which model has which gear size. Too many influencing factors come into play here (engine type/gearbox type/year of manufacture/model).