Lumines

LED radio receiver 5in1-15A-MONO/CCT/RGB/RGB+CCT LS2

Name: LED radio receiver 5in1-15A-MONO/CCT/RGB/RGB+CCT LS2
Brand: Lumines

MiBOXER 5-in-1 radio receiver is a controller that allows you to control MONO, RGB, RGBW, CCT and RGB+CCT LED strips. MiBOXER receiver in combination with MiBOXER remote control are products with an interesting and original way of operation. The connection between the receiver and the remote control is made by means of radio waves with a frequency of 2.4GHz. The receiver can be installed at any stage of LED strip installation, as it is mounted between the power supply and the strip. Diagram of the connection of the LED power supply, driver and LED tape MONO Connection diagram of LED power supply, driver and LED CCT tape Connection diagram of LED power supply, driver and LED RGB tape Connection diagram of LED power supply, driver and RGBW LED strip Connection diagram of LED power supply, driver and RGB+CCT LED tape The receiver allows you to control using apps and voice assistants. This requires pairing with a Wi-Fi gateway (sold separately). Use the app to adjust the lighting to the rhythm of your day. Reducing the brightness of the light at night or turning on the lights in a room in the morning - many options from a single app. With a current of 15A, a longer section of LED strip can be connected to the driver. Different models of receivers can work together synchronously. They must be controlled from the same device, in the same dynamic mode and from a distance of no more than 30m. The devices are characterized by the ability to transmit the signal from the receiver to the next device, increasing the range of the. Signal transmission is possible when the distance between consecutive devices is less than 30m. The ability to transmit and synchronize the signal Pairing the remote control with the receiver is extremely easy. Perform the action of disconnecting the main power supply from the receiver (1), and then reconnect the power supply, where in the first 3 seconds briefly hold the previously selected channel on the remote control (2) respectively. The result of the correct pairing of the devices will be the blinking of the LED strip (3) three times. Pairing diagram of the receiver with the remote control Dimensions 128x38x23mm Voltage DC 12V-24V Working range ~30m Operating current 6A per channel Maximum load 15A Frequency 2.4 GHz Wi-Fi control with Wi-Fi gateway Output connection common anode Autotransmission yes Signal synchronization yes