LED Labs

LED strip PRO 3Y 24V 240 LED/m 2216 SMD Cold White, 15W, RA90 HS, 1200 LEDs., 5 m

Name: LED strip PRO 3Y 24V 240 LED/m 2216 SMD Cold White, 15W, RA90 HS, 1200 LEDs., 5 m
Brand: LED Labs

Equipped with Blue Tape mounting tape. Neutral white color Neutral color is the closest to sunlight. It will find use wherever our eyes are forced to strain: at work, in the office in the home premises. It is the most versatile light color. Cold white color The light of the tape with a cold white color introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. Voltage 24V - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. 1200 LED 2216 SMD tape The density of LED tapes indicates the number of LEDs per meter of LED tape. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more diodes the more often we can cut the tape. In the tape there are 1200 diodes on a stretch of 5m. Such a dense arrangement of LEDs will allow us to achieve a smoother lighting effect. IP65HS LED strip The IP65HS LED tape is covered with a shrink wrap, which tightly covers the tape. This provides increased protection against moisture. Since the shrink band is thinner than the silicone layer, IP65HS tapes have a higher luminosity than tapes with the same parameters with IP65 protection. Requires installation of a power supply The installation of a LED lighting system based on LED strips requires the installation of a power supply allowing to reduce the mains voltage to 12 or 24V, depending on the LED strips used. When designing LED lighting, it is worth remembering that the power supply is an integral part of the whole system, the smooth functioning of which is related not only to the selection of a professional LED strip, but also a reliable LED power supply. Installation of power supplies is done in invisible places, often difficult to access, so it is very important that when choosing an LED power supply, make a choice that allows for many years of operation. The choice of power supply depends on the power of the LED strip, its voltage and the length of the installation. You should also pay attention to the shape and size of the power supply to ensure the most convenient installation. Why choose a professional version of LED tape ? Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is more than twice the life of the tape. Another advantageous feature of professional tapes is their repeatability. Deciding to install professional LED tape, we are almost 100% sure that each roll of tape will have the same color and light output.