LED Labs

LED strip PRO 3YB 24V 5630 SMD Cold White, IP65HS, 16W, 300 LEDs., 5 m

Name: LED strip PRO 3YB 24V 5630 SMD Cold White, IP65HS, 16W, 300 LEDs., 5 m
Brand: LED Labs

LED Basic tapes are a series of LED Labs Lighting brand tapes with a 3-year warranty. The 3Y Basic tape series is built on selected, reliable 2835 SMD, 5630 SMD LEDs. Cold white color The light of the tape with a cold white color introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. IP65HS LED strip LED strips IP65HS are covered with a heat-shrinkable band, which under the influence of temperature tightly covers the LED strip. Such a cover allows for increased waterproofing while maintaining high light performance. Increased waterproofing is achieved through the use of a thin band layer, which usually translates into higher lumen output and greater color uniformity than analogous IP65 tapes. See the colors in their natural shades High CRI value guarantees the highest color quality of illuminated objects. The higher the value of the parameter, the more natural the appearance of the objects. The use of tape with a CRI of more than 80 allows to reflect the true color of objects in the room where the LED tape was used. Tape 300 LED 5630 SMD 5630 are LEDs of a larger size than those most commonly found in LED tapes. They allow greater light emission than 3528 and 2835 LEDs, but this is associated with increased power consumption. This is ideal for functional lighting, such as. kitchen workspace. The density of LED strips tells you the number of LEDs per meter of LED strip. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more LEDs the more often we can cut the tape. Tapes with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED strip when connecting in series than it is the case with 12V LED strips. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Requires installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation. LED drivers - more control over light Control LED strips in a convenient way: by hand movement, voice or remote control. Drivers allow you to take advantage of all the possibilities offered by LED technology. The controller can be placed in the profile, where it allows control by a button or motion sensor. It can also be hidden with the power supply and controlled by radio waves. There are also WiFI controllers that allow voice control with voice assistants and using android and iOS devices. The possibilities are almost endless.