LED Labs

LED strip PRO 5Y 24V 640 LED 2835 SMD 12W 5000K RA90, 5 m

Name: LED strip PRO 5Y 24V 640 LED 2835 SMD 12W 5000K RA90, 5 m
Brand: LED Labs

The 5Y series are LED strips with a seven-year warranty. Careful selection of LEDs ensures uniform light color along the entire length of the LED strip. They feature a low color temperature spread of 3 SDCM (Standard Deviation Colour Matching). An additional advantage is the high CRI color rendering index (>90) and the 3oz PCB backing. Each LED tape has double-sided adhesive tape tesa 4965 which is the best double-sided tape on the market. Neutral white color Neutral color is the color that is most similar to sunlight. This is the most versatile color of LED strips, which can be used both in domestic spaces and workplaces. Such light is not tiring to the human eye. Neutral LED tape is also a good solution for office lighting. The color neutral white is ideal for rooms where we spend a lot of time. IP20 LED strip IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 640 LED 2835 SMD tape LED 2835 - is an energy-saving diode with a small size. It is a more powerful alternative to the 3528 LED.The density of LED strips indicates the number of LEDs per meter of LED strip. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more LEDs the more often we can cut the tape.Tapes with a density of 128 LED/m allow for a uniform line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Requires installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.