LED Labs

PRO 3Y 24V 2640 LED COB 10W CW RA90 tape, 5 m

Name: PRO 3Y 24V 2640 LED COB 10W CW RA90 tape, 5 m
Brand: LED Labs

A distinctive feature of the tape is the use of COB (Chip on Board) diode in it. The use of COB technology makes it possible to achieve a uniform line of light even with the lowest LED profiles. An additional advantage of using COB LED in LED strips is a wider angle of light dispersion and high light efficiency. COB LEDs emit a far superior beam of light compared to older LED technologies at lower power consumption. The 3Y series of LED strips is a line of products designed for professionals. LED 3Y strips are branded by LED Labs Lighting and come with an extended warranty period. LED strips with an IP rating of 20 are subject to a five-year warranty period. Thanks to the use of a 3oz copper PCB backing, it was possible to significantly increase their lifespan. The 3Y series also means noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. Cold white color LED tape in cold white color, is intended as an indoor decorative element. Due to the ability of high light dispersion, lighting is richly used in creating lighting arrangements, as well as in accentuating selected components of equipment.. It does a good job in rooms where we need a feeling of sterility. It introduces a feeling of coolness into the room, so it is used in places where we want to relax. It also works well in offices, production spaces, garages or as strong lighting for advertisements or stores. IP20 LED strip The IP20 parameter for LED tapes defines the most common degree of waterproofing found on the market. IP20 LED strips are designed for use wherever there is no danger of excessive moisture or exposure to water. The LED strip specified with such a class of waterproofness allows exposure to dry dust and dust, thanks to the protective layer that the LEDs mounted on the strip are covered with. LED strips 24V - lower voltage drops The choice of 24V LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows you to lay longer sections of LED tape without the risk of voltage drops at the ends of the tape sections. Thanks to lower current consumption, 24V LED strips also allow the use of smaller wires, which can be helpful in designing installations. This allows the wires to be more easily hidden. LED 24V strips are increasingly popular in the market. See the colors in their natural shades CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 2640 LED COB strip The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light will be obtained. Thanks to the use of COB (chip on board) LEDs, the greater number of LEDs and the emission of a better beam of light is not associated with higher power consumption compared to SMD tapes. Requires the installation of a power supply LED tape requires a low DC 24V power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply. Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).