LED Labs

Tape PRO 3Y 24V 350 LED 2835 SMD 6W NW RA90, 5 m

Name: Tape PRO 3Y 24V 350 LED 2835 SMD 6W NW RA90, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. Neutral white color Neutral white color is a universal light color. The light of LED tape is not tiring to the human eye, so it can be used in places where we spend a lot of time: offices, apartments. IP20 LED tape IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 350 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape and the lampshade are placed. Tapes with a density of 70 LEDs per meter make it possible to achieve a line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED strip