The HPE Networking Instant On Switch 1930 series is designed for small and growing businesses that require enhanced performance to support bandwidth-demanding applications. The 1930 switch series seamlessly integrates with existing Instant On indoor/outdoor access points and can be centrally managed with the Instant On mobile app onsite or remotely. These cloud-managed layer 2+ Ethernet switches consist of 8-, 24-, and 48-port Class 4 PoE (i.e. PoE+) and non-PoE Gigabit Ethernet models, with 1 G SFP slots on 8-port model and 1 G/10 G SFP+ slots on 24-/48 G models for fiber connectivity. What is new supporting point: HPE Networking Instant On mobile app and/or cloud-based web portal for easy network management onsite or remotely. Option to manage your switches through local web GUI. 1 G/10 G SFP+ ports on 24-and 48-port models for fiber connectivity. Non-PoE and Class 4 PoE (i.e. PoE+) 8-, 24- and 48-port models for deployment flexibility. Seven advanced smart managed Layer 2+ Gigabit switches for high-performance connectivity. Ports & interfaces Basic switching RJ-45 Ethernet ports quantity: 24 Basic switching RJ-45 Ethernet ports type: Gigabit Ethernet (10/100/1000) Installed SFP modules quantity: 0 Installed SFP+ modules quantity: 0 SFP+ module slots quantity: 4 Weight & dimensions Width: 43.9 mm Depth: 442.5 mm Height: 264.7 mm Weight: 3.73 kg Power Power source: AC Power supply included: Yes AC input voltage: 200 - 240 V AC input frequency: 50 - 60 Hz Power consumption (max): 490 W Power consumption note: 490W maximum, 30W idle Operational conditions Operating temperature (T-T): 0 - 40 °C Storage temperature (T-T): -40 - 70 °C Operating relative humidity (H-H): 15 - 95% Storage relative humidity (H-H): 15 - 95% Operating altitude: 0 - 3048 m Network Networking standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1Qaz, IEEE 802.1ab, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z 10G support: Yes Port mirroring: Yes Full duplex: Yes Flow control support: Yes Link aggregation: Yes Rate limiting: Yes Auto MDI/MDI-X: Yes Spanning tree protocol: Yes Auto-sensing: Yes VLAN support: Yes Data transmission MAC address table: 16000 entries Switching capacity: 128 Gbit/s Throughput: 95.23 Mpps Latency (10-100 Mbps): 4.7 µs Latency (1 Gbps): 2.4 µs Latency (10 Gbps): 1.3 µs Jumbo frames support: Yes Jumbo frames: 9216 Packet buffer memory: 1.5 MB Security DHCP features: DHCP client Access Control List (ACL): Yes IGMP snooping: Yes SSH/SSL support: Yes Management features Switch type: Managed Switch layer: L2/L3/L4 Quality of Service (QoS) support: Yes Web-based management: Yes Cloud-managed: Yes ARP inspection: Yes System event log: Yes Other features Memory and processor: ARM Cortex-A9 @ 800 MHz 512 MB SDRAM, 256 MB flash 1.5 MB packet buffer Performance management: Instant On Portal, Web browser, SNMP Manager I/O ports: 24 RJ-45 autosensing 10/100/1000 Class 4 PoE ports (IEEE 802.3 Type 10 BASE-T, IEEE 802.3u Type 100 BASE-TX, IEEE 802.3ab Type 1000 BASE-T) Duplex: 10 BASE-T/100 BASE-TX: half or full; 1000 BASE-T: full only 4 SFP+ 1/10 GbE ports Weight (imperial): 3.73 kg (8.23 lbs) Dimensions (W x D x H) (imperial): 43.9 x 442.5 x 264.7 mm (1.73 x 17.4 x 10.4") Design Rack mounting: Yes Stackable: No Form factor: 1U Product colour: White Power over Ethernet (PoE) Power over Ethernet (PoE): Yes Total Power over Ethernet (PoE) budget: 370 W Performance Built-in processor: Yes Processor model: ARM Cortex-A9 Processor frequency: 800 MHz Memory type: SDRAM / Flash Internal memory: 512 MB Flash memory: 256 MB