
Lumines
Recessed LED profile LUMINES inTALIA white lacquered 2.02 m
The LUMINES inTALIA profile in white lacquer is a 2.02 m aluminium bar, producer code 10-0231-20, made to sit in a milled opening in a ceiling or wall, including plasterboard. The section shows a wide flange and a channel for two LED strips placed side by side. The bar itself does not light: the strip, driver and cover are chosen separately. Section to compare with the opening The flange is 48.8 mm wide and the profile is 28.8 mm high overall. The lower body measures 35.8 mm across. The source channel is 32.4 mm wide and 17.8 mm high, which is the space for two strips of up to 12 mm each. The current datasheet does not print a separate milling size. Before cutting the board, compare the 48.8 mm flange and the 28.8 mm height with the board thickness and the planned slot, so the body enters the gap and the flange rests on its edge. What this code includes The package is one white lacquered length of 2020 mm. It does not include an LED strip, a driver, a cover, end caps, mounting springs or a mounting profile. The cover comes from the DOUBLE family and presses in from above. Lumines lists transparent, frozen, milky, milky frosted, opal and black versions, in PMMA or PC, including fractal variants. That cover decides whether the LED points stay visible or the line evens out. inTALIA end caps are aluminium and have a cable hole; they come in white, black and silver. A white cap matches this lacquer. The driver stays outside the profile, not inside it. Fixing and joining the line The datasheet describes two fixing methods: mounting springs, or TALIA M3 and TALIA M4 mounting profiles. Both belong to the inTALIA system, but they are sold separately. Lengths can be joined with a straight connector, a 90° angle, a 90° transverse connector, a 120° angle, a 135° angle or a 3×120° set, and with the TALIA inter-profile connector. The cable gland is a separate accessory. The profile is not rated for vehicles to drive over. Aluminium carries heat away from the strips; keep source power inside the limit on the current Lumines datasheet, because the printed dissipation figures do not state a reference length. Dry rooms and the character of the line IP20 and the lack of sealing keep this profile in dry rooms. It is not a bathroom, outdoor or splash-zone profile. Lumines points it at decorative and main light in ceilings and walls of offices and public interiors: an office, a study, an office building, a hotel, a shop, a restaurant, a corridor and a staircase. The same section also suits a dry hallway, living room, bedroom, dining room and kitchen when the opening is in the board, not above a sink. White lacquer and the plain rectangular section make a modern, minimalist line that is meant to disappear into a light ceiling rather than draw a dark metal frame.Mostrar mais
Oferta
Todos os preços com IVA; portes segundo o feed da loja. O clique leva diretamente à página do produto na loja.
Histórico de preço (preço mínimo)
Detalhes do produto
- Marcas
- Lumines
- GTIN
- 05902973363715
- Categorias
- Casa e jardim > Iluminação
Produtos semelhantes
STEINEL IS 130-2 Passive infrared (PIR) sensor Wired Wall Black -Comparação de preços de 2 lojasdesde 35,62 €
STEINEL ST 608810 motion detector Infrared sensor Wired Wall White -Comparação de preços de 2 lojasdesde 61,00 €
Steinel 034580 Wand PIR-Bewegungsmelder 180° Relais anthracite IP54Comparação de preços de 2 lojasdesde 75,87 €
Nordlux Fox Transformer 12 V, 3–55 W LED / 20–55 W Halogen, White 12351101Comparação de preços de 2 lojasdesde 61,20 €
Nordlux 49091003 smart home multi-sensor Wireless Bluetooth - NordluxComparação de preços de 2 lojasdesde 30,60 €
STEINEL IS 130-2 Passive infrared (PIR) sensor Wired Wall White -Comparação de preços de 2 lojasdesde 41,06 €