LED Labs

LED strip PRO 3YB 24V 2835 SMD Warm White, IP65HS, 12W, 600 LEDs., 5 m

Name: LED strip PRO 3YB 24V 2835 SMD Warm White, IP65HS, 12W, 600 LEDs., 5 m
Brand: LED Labs

The 3Y basic series are LED strips embedded on a 2oz copper PCB substrate. They are covered by a 3-year warranty period. The LED tape comes with double-sided Blue Tape mounting tape. Warm white color Warm white color, thanks to a pleasant light similar to that of traditional incandescent bulbs, is a solution suitable for installation in rooms intended for leisure and daily activities. Warm white light is not associated with the cold lighting characteristic of offices, making it possible to relax and unwind. LED strips 24V - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. See the colors in their natural shades Vibrant colors in your home, thanks to high CRI tape. The indicator shows the difference between the color of the illuminated object and its color in natural light. The higher the parameter, the more natural the colors are. CRI >80 means better appearance of food, clothing and other items. 600 LED 2835 SMD tape The 2835 diode - is an energy-saving diode with a small size. It is a more powerful alternative to the 3528 LED. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the strip is placed and the lampshade. LED strips with a density of 120 LED/m are strips that allow you to obtain uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. LED strip for use in areas exposed to moisture IP65HS LED strips are covered with a heat-shrinkable band, which under the influence of temperature tightly covers the LED strip. Such a cover allows for increased waterproofing while maintaining high light performance. Increased waterproofing is achieved through the use of a thin band layer, which usually translates into a higher luminous flux and greater color uniformity than the equivalent IP65 bands. Requires installation of a power supply The LED strip requires a 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.Mostrar mais

desde 26,57 €

1 oferta

Ver ofertas