LED Labs

LED strip PRO 5Y 24V 320 LED 2835 SMD 6W 6500K RA90, 5 m

Name: LED strip PRO 5Y 24V 320 LED 2835 SMD 6W 6500K RA90, 5 m
Brand: LED Labs

LED strips 5Y series are professional LED strips. They are distinguished by their high CRI color rendering index. The tapes allow to obtain a line of light of uniform color, thanks to a low dispersion of color temperature. They come with as much as a 7-year warranty. They are mounted on a 3oz PCB substrate, which minimizes voltage drops. The LED strips have Tesa 4965 mounting tape. Cold white color The light of the cold white color tape introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. IP20 LED strip IP20 LED strips, although they do not have a silicone shield, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 320 LED 2835 SMD tape The 2835 diode - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape is placed and the lampshade. Strips with a density of 64 LED/m are strips that allow for uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Requires installation of a power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.