LED Labs

LED strip PRO 5Y 24V 640 LED 2835 SMD 12W 2700K RA90, 5 m

Name: LED strip PRO 5Y 24V 640 LED 2835 SMD 12W 2700K RA90, 5 m
Brand: LED Labs

LED 5Y strips are covered by up to 7-year warranty! They are characterized by a low dispersion of color temperatures (at the level of 3 SDCM). This means that the human eye does not notice differences in the color temperature of individual LEDs. This gives the effect of uniform light color along the entire length of the tape. CRI color rendering index (>90) and 3oz PCB backing, allows for perfect color reproduction and lower voltage drops. They feature Tesa 4965 mounting tape. Ultra warm white color Ultra warm color tape is used as decorative lighting, bringing a cozy touch to the room. It can be used as accent lighting for shelves and furniture. IP20 LED strip IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 640 LED 2835 SMD tape LED 2835 - is an energy-saving diode with a small size. It is a more powerful alternative to the 3528 diode.The density of the tape is the number of diodes on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. Strips with a density of 128 LED/m allow for a uniform line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Requires installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 24V tapes need a power supply with 24V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.