LED Labs

PRO 3Y 12V 300 LED 5050 SMD 12W NW tape, 5 m

Name: PRO 3Y 12V 300 LED 5050 SMD 12W NW tape, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. Neutral white color Neutral white LED tape allows for more light. This is the color that is most similar to daylight. Even a long stay in a room illuminated by a neutral-colored light source is not tiring to the eyes. This makes the tape universally applicable, it will work in virtually any room. LED tape IP20 IP20 LED strips are the most commonly used LED strips. Wherever there is no exposure to moisture and water, they are the choice to guarantee a long life. The absence of a cover to reinforce waterproofing affects the better dissipation of heat from the LED strip, which translates into the life expectancy of the LED strip. LED strip in IP20 waterproof strips can perfectly cope with dust and dry dirt thanks to the protective layer coating the LEDs. See the colors in their natural shades When choosing an LED strip, it is worth paying attention to the CRI parameter, the value of which determines how close the light color is to natural daylight. It affects the way our eyesight perceives illuminated objects. The value of the RA parameter is measured in the range from 0 to 100, where the maximum result reproduces the effect of daylight. This is the most desirable value. LED strips with a parameter above CRI>80 allow natural color reproduction on the illuminated objects. Tape 300 LED 5050 SMD The 5050 diode is a diode with a larger size than the common 3528 and 2835 diodes. Increased size allows for greater light emission. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape and the lampshade are placed. Tapes with a density of 60 LEDs per meter make it possible to achieve a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply Installation of a LED lighting system based on LED strips requires the installation of a power supply that allows to reduce the mains voltage to 12 or 24V, depending on the LED strips used. When designing LED lighting, it is worth remembering that the power supply is an integral part of the whole system, the smooth functioning of which is related not only to the selection of a professional LED strip, but also a reliable LED power supply. Installation of power supplies is done in invisible places, often difficult to access, so it is very important that when choosing an LED power supply, make a choice that allows for many years of operation. The choice of power supply depends on the power of the LED strip, its voltage and the length of the installation. You should also pay attention to the shape and size of the power supply to ensure the most convenient installation. Why choose a professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).