LED Labs

PRO 3Y 24V 2640 LED COB 10W NW RA90 tape, 5 m

Name: PRO 3Y 24V 2640 LED COB 10W NW RA90 tape, 5 m
Brand: LED Labs

A distinctive feature of the tape is the use of COB (Chip on Board) diode in it. The use of COB technology makes it possible to achieve a uniform line of light even with the lowest LED profiles. An additional advantage of using COB LED in LED strips is a wider angle of light dispersion and high light efficiency. COB LEDs emit a far superior beam of light compared to older LED technologies at lower power consumption. Control LED strips in a convenient way: by hand movement, voice or remote control. Drivers allow you to take advantage of all the possibilities offered by LED technology. The controller can be placed in the profile, where it allows control by a button or motion sensor. It can also be hidden with the power supply and controlled by radio waves. There are also WiFI controllers that allow voice control with voice assistants and using android and iOS devices. The possibilities are almost endless. Neutral white color LED tape designed for use as an element of the main lighting of rooms, for the construction of LED fixtures, to highlight exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. IP20 LED strip IP20 LED strips are strips that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip. LED strips 24V - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. 2640 LED COB tape Visible points of light in the LED tape are the effect of point arrangement of LEDs. The more LEDs there are on the tape, the more uniform light will be obtained. Thanks to the use of COB (chip on board) LEDs, the greater number of LEDs and the emission of a better beam of light is not associated with higher power consumption compared to SMD tapes. Requires the installation of a power supply Installation of a LED lighting system based on LED strips requires the installation of a power supply that allows you to reduce the mains voltage to 12 or 24V, depending on the LED strips used. When designing LED lighting, it is worth remembering that the power supply is an integral part of the whole system, the smooth functioning of which is related not only to the selection of a professional LED strip, but also a reliable LED power supply. Installation of power supplies is done in invisible places, often difficult to access, so it is very important that when choosing an LED power supply, make a choice that allows for many years of operation. The choice of power supply depends on the power of the LED strip, its voltage and the length of the installation. It is also worth paying attention to the shape and size of the power supply to ensure the most convenient installation. Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).