LED Labs

Tape PRO 3Y 12V 600 LED 2835 SMD 9.6W CW RA90, 5 m

Name: Tape PRO 3Y 12V 600 LED 2835 SMD 9.6W CW RA90, 5 m
Brand: LED Labs

LED Tape Series 3Y is a line of products designed for professionals. LED 3Y strips are branded by LED Labs Lighting and come with an extended warranty period. LED strips with an IP rating of 20 are subject to a five-year warranty period. Thanks to the use of a 3oz copper PCB backing, it was possible to significantly increase their lifespan. The 3Y series also means noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. Cold white color The light of the cold white color tape introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. IP20 LED strip IP20 LED strips, although they do not have a silicone shield, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 600 LED 2835 SMD tape LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape is placed and the lampshade. Tapes with a density of 120 LED/m allow you to achieve a line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. Requires installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 12V tapes need a power supply with 12V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.