V-TAC

V-TAC VT-706-B-N black LED wall light 3 W 428 lm 3000 K IP65 SKU 218215

Name: V-TAC VT-706-B-N black LED wall light 3 W 428 lm 3000 K IP65 SKU 218215
Brand: V-TAC

V-TAC VT-706-B-N, SKU 218215, is a black round LED wall light for an interior wall or exterior façade. Exact EAN 3800157681445 identifies the 3 W, 428 lm and 3000 K version. Four optical windows around the body create a cross-shaped light pattern. IP65 supports outdoor use, while the aluminium housing measures 15 cm in diameter and 5 cm deep. Four light directions around the fitting Light exits through four narrow windows positioned around the rim, producing four separate beams on the wall rather than one forward-facing pool. The current manufacturer card describes the optics as 120° × 5° in four directions. The effect is clearest on an even surface after dark, and a lit view showing it has been selected as the supporting gallery image. The fitting can mark a façade, entrance or part of a corridor. 3 W, 428 lm and warm 3000 K The integrated SMD LED module consumes 3 W and emits 428 lm in a warm 3000 K colour. CRI above 80 provides standard colour rendering for orientation and decorative lighting. The source carries energy class E and EPREL number 1163849. V-TAC states a 20,000-hour service life and more than 15,000 switching cycles. The fitting is not dimmable, so it should be connected to a normal switched circuit without a brightness controller. 15 cm diameter with a black aluminium body The housing measures 15 × 15 × 5 cm and projects only 5 cm from the wall. Its black round form contains the integrated electronics, while four clear windows control distribution. Aluminium is used for the housing and transparent glass for the optical windows. The stated 0.82 kg is the gross packaged weight; V-TAC does not publish a separate net product weight. Plan the rotation before drilling because the windows determine the light-cross orientation. IP65, 220–240 V and fixed installation IP65 means dust-tight construction and protection against water jets, not immersion. The wall light operates at 220–240 V and 50/60 Hz. Its LED source is non-replaceable; when the source reaches end of life, the manufacturer instructs that the complete luminaire be replaced. Installation requires isolation of the circuit, fixing the mounting plate, connecting L, N and protective-earth conductors and closing the body with its screws. A qualified electrician should make the fixed connection, ensure earth continuity and preserve a suitably sealed cable entry for the mounting location.Mostrar mais

desde 69,22 €

1 oferta

Ver ofertas