LED Labs

LED strip PRO 3Y 24V 3527 SMD CCT, 20W, 600 LEDs, 5 m

Name: LED strip PRO 3Y 24V 3527 SMD CCT, 20W, 600 LEDs, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape in this series comes with Blue Tape mounting tape. CCT LED Tape CCT LED tapes have the ability to change the color temperature. One LED strip provides both warm and cold colored light. LED CCT tape will find particular use where there is a need to change the climate in the room. The cold color will stimulate work, and a change to a warm color will allow the interior to have a cozy atmosphere. The CCT tape requires the installation of an LED driver. LED strips 24V - lower voltage drops Choosing 24V LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows to lay longer sections of LED tape without the risk of voltage drops at the ends of the tape sections. Thanks to lower current consumption, 24V LED strips also allow the use of smaller wires, which can be helpful in designing installations. This allows the wires to be more easily hidden. LED 24V strips are increasingly popular in the market. IP20 LED tape IP20 LED strips are strips that do not have a silicone cover. They are covered with a thin layer of varnish that protects against water vapor. However, this is not sufficient protection against moisture. The lack of a cover results in better heat dissipation, which translates into a longer life of the LED strip. See the colors in their natural shades The CRI parameter determines how the light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to how they appear when exposed to daylight emission. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the effect of daylight. The use of LED strips with a CRI above 80 allows for more natural and pleasant color reproduction on the illuminated objects. Tape 600 LED 3527 SMD The density of LED tape determines how many LEDs are on a meter of tape. The more LEDs per meter of LED tape, the more uniform and powerful the light is. Tapes with a density of 120 LED/m allow for a uniform line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. Requires installation of a power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply. Requires installation of LED driver A driver is required to install the CCT LED strip. With it, it is possible to change the color temperature. When choosing a driver, voltage is an important parameter (the driver is mounted between the power supply and the LED strip). Why choose a professional version of LED tape ? Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is more than twice the life of the tape. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).