LED Labs

LED strip PRO 5Y 24V 640 LED 2835 SMD 12W 10000K RA90, 5 m

Name: LED strip PRO 5Y 24V 640 LED 2835 SMD 12W 10000K RA90, 5 m
Brand: LED Labs

The 5Y series are LED strips with a seven-year warranty. Careful selection of LEDs ensures uniform light color along the entire length of the LED strip. They feature a low color temperature spread of 3 SDCM (Standard Deviation Colour Matching). An additional advantage is the high CRI color rendering index (>90) and the 3oz PCB backing. Each LED tape has double-sided adhesive tape tesa 4965 which is the best double-sided tape on the market. Ultra cold white color Ultra cold color tape is used as decorative lighting. It is often used to highlight elements we want to draw attention to when designing LED lighting in rooms. Used to illuminate paintings, the interior surface of bars or advertising elements. IP20 LED strip IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The absence of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 640 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. It is a more powerful alternative to the 3528 diode.The density of the tape is the number of diodes on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. Strips with a density of 128 LED/m allow for a uniform line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. LED strips 24V - lower voltage drops LED 24V tape guarantees lower voltage drops compared to 12V LED tape. This is especially important when installing longer lengths of tape in series. While we recommend combining 12V LED strips (with single-sided power supply) into a maximum of 5-meter lengths, 24V strips allow you to create up to twice as long lengths of LED tape. Requires installation of a power supply LED tape requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.