LED Labs

LED strip PRO 5Y 24V 640 LED 2835 SMD 12W 6500K RA90, 5 m

Name: LED strip PRO 5Y 24V 640 LED 2835 SMD 12W 6500K RA90, 5 m
Brand: LED Labs

LED 5Y strips are covered by up to 7-year warranty! They are characterized by a low dispersion of color temperatures (at the level of 3 SDCM). This means that the human eye does not notice differences in the color temperature of individual LEDs. This gives the effect of uniform light color along the entire length of the tape. CRI color rendering index (>90) and 3oz PCB backing, allows for perfect color reproduction and lower voltage drops. They feature Tesa 4965 mounting tape. Cold white color Cold white color lighting has stimulating properties. Such lighting is used in workplaces, offices or co-working spaces. Cool shades of light give the impression of sterility, which is why they are often used in cosmetic, dental or medical offices. IP20 LED strip IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 640 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Tape density is the number of diodes on the tape. On high-density tapes there is no phenomenon of beads, i.e. visible points of light. The higher the density of the LED strip, the more uniform the light is. Strips with a density of 128 LED/m allow for a uniform line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. LED strips 24V - lower voltage drops LED 24V tape guarantees lower voltage drops compared to 12V LED tape. This is especially important when installing longer lengths of tape in series. While we recommend combining 12V LED strips (with single-sided power supply) into a maximum of 5-meter lengths, 24V strips allow you to create up to twice as long lengths of LED tape. Requires installation of a power supply LED tape requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.