LED Labs

PRO 3Y 24V 300 LED 5050 SMD 16W RGBNW tape, 5 m

Name: PRO 3Y 24V 300 LED 5050 SMD 16W RGBNW tape, 5 m
Brand: LED Labs

LED tapes offered by our company have a wide range of possibilities for functional, yet comfortable installation of attractive interior design. Professional LED tapes are characterized by high energy efficiency, effectiveness and the ability to create a unique visual effect, which have all kinds of applications. From decorative lighting through main lighting in the living room, room, kitchen, bathroom to professional lighting in offices or markets. RGBNW LED strip LED RGBNW tape is a multicolor tape with the possibility of neutral white color. RGB LEDs allow you to get light in colors from the RGB color palette, and additional LEDs emit light in neutral white color. The LED strip requires the installation of a controller, allowing you to change the color of the light and turn on white light. IP20 LED strip IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The lack of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Tape 300 LED 5050 SMD The 5050 diode is a diode with a larger size than the 3528 and 2835 diodes often seen. Increased size allows for greater light emission. Often used as functional lighting, such as. When illuminating the bathroom mirror. strips with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).