LED Labs

Tape PRO 3Y 12V 600 LED 2835 SMD 9.6W WW RA90-25m, 5 m

Name: Tape PRO 3Y 12V 600 LED 2835 SMD 9.6W WW RA90-25m, 5 m
Brand: LED Labs

LED Tape Series 3Y is a line of products designed for professionals. LED 3Y strips are branded by LED Labs Lighting and come with an extended warranty period. LED strips with an IP rating of 20 are subject to a five-year warranty period. Thanks to the use of a 3oz copper PCB backing, it was possible to significantly increase their lifespan. The 3Y series also means noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. Warm white color Warm white LED strips are a good choice wherever we design rooms for daily domestic activities. Warm white color has a calming and relaxing effect even with prolonged exposure to light. Warm white color will work very well as the main lighting and in places where we are looking for accent lighting of selected objects or whole furniture. IP20 LED strip The IP20 parameter in the case of LED tapes defines the most popular degree of waterproofing found on the market. IP20 LED strips are designed for use wherever there is no danger of excessive moisture or exposure to water. The LED strip specified with such a class of waterproofness allows exposure to dry dust and dust, thanks to the protective layer that the LEDs mounted on the strip are covered with. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 600 LED 2835 SMD tape LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light you will get.LED tapes with a density of 120 LED/m are tapes that allow you to get uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. 12V tapes need a power supply with 12V output voltage. Another important aspect is adequate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.