LED Labs
Tape PRO 3Y 24V 1600 LED 2835 SMD 24W WW RA90, 5m
LED Tape Series 3Y is a line of products designed for professionals. LED 3Y strips are branded by LED Labs Lighting and come with an extended warranty period. Thanks to the use of a 3oz copper PCB backing, it was possible to significantly increase their lifespan. The 3Y series also means noticeably lower voltage drops compared to standard LED strips. The 3Y series LED strips are finished with professional Blue Tape mounting tape, allowing immediate application in the cleaned LED profile. Warm white color Warm white LED strips are a good choice wherever we design rooms for daily domestic activities. Warm white color has a calming and relaxing effect even with prolonged exposure to light. Warm white color will work very well as the main lighting and in places where we are looking for accent lighting of selected objects or whole furniture. IP20 LED strip IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. LED strips 24V - lower voltage drops The choice of 24V LED strips is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system, allows you to lay longer sections of LED tape without the risk of voltage drops at the ends of the tape sections. Thanks to lower current consumption, 24V LED strips also allow the use of smaller wires, which can be helpful in designing installations. This allows the wires to be more easily hidden. LED 24V strips are increasingly popular in the market. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Requires the installation of a power supply LED tape requires installation of a power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED strip
Erbjudande
Alla priser inkl. moms; frakt enligt butikens feed. Klicket leder direkt till produktsidan i butiken.
Prisutveckling (lägsta pris)
2026-07-23 – 2026-07-26min 804,93 kr · max 810,81 kr
Produktdetaljer
- Märken
- LED Labs
- GTIN
- 05904405934388