LED Labs

LED strip PRO 3Y 24V 2835 SMD Neutral White, IP20, 12W, RA90 700 LEDs, 5 m

Name: LED strip PRO 3Y 24V 2835 SMD Neutral White, IP20, 12W, RA90 700 LEDs, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. Neutral white color Neutral white color is a universal light color. The light of LED tape is not tiring to the human eye, so it can be used in places where we spend a lot of time: offices, apartments. IP20 LED tape IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The absence of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. LED strips 24V - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. See the colors in their natural shades The CRI parameter determines how the light reflects the colors of the object being illuminated, allowing them to be perceived in the most natural way, similar to how they appear when exposed to daylight emission. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the effect of daylight. The use of LED strips with a CRI above 80 allows for more natural and pleasant color reproduction on the illuminated objects. Tape 700 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light you will get. Tapes with a density of 140 LED/m allow you to get a uniform line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. Requires installation of a power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).