LED Labs

LED strip PRO 3Y 24V 900 LED 2835 SMD 8W NW 180lm/W, 5 m

Name: LED strip PRO 3Y 24V 900 LED 2835 SMD 8W NW 180lm/W, 5 m
Brand: LED Labs

LED strips 3Y have a warranty period of 5 years for IP20 rated strips and 3 years for IP65HS rated LED strips. The diodes are embedded on a 3oz copper PCB substrate, so they have lower voltage drops. The LED tapes come with professional Blue Tape mounting tape. Neutral white color Neutral color is the color that is most similar to sunlight. This is the most versatile color of LED strips, which can be used both in domestic spaces and workplaces. Such light is not tiring to the human eye. Neutral LED tape is also a good solution for office lighting. The color neutral white is ideal for rooms where we spend a lot of time. IP20 LED strip IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. LED strips 24V - lower voltage drops When installing longer lengths of LED tape, it is worth choosing a 24V tape. This will reduce voltage drops that could occur when installing 12V tape. In addition, thinner wires can be used to mount the 24V tape, allowing it to be more easily hidden during installation. See the colors in their natural shades Depending on the lighting, objects can have different colors. How the colors of the illuminated object are close to the colors seen in daylight is determined by the CRI parameter. A value above 80 allows for true color rendering, which means more vivid colors of food, clothing and other objects. 900 LED 2835 SMD tape The 2835 diode - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. The density of LED strips tells you the number of LEDs per meter of LED strip. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more diodes the more often we can cut the tape. LED strips with a density of 180 LED/m are strips that allow for uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.