LED Labs

LED strip PRO 3Y 5050 SMD RGBWW, 16W, 300 LEDs, 5 m

Name: LED strip PRO 3Y 5050 SMD RGBWW, 16W, 300 LEDs, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. RGBWW LED Tape RGBWW LED strips are RGB strips equipped with an additional diode emitting warm white light. Normally in RGB tapes the white color is obtained by switching on 3 diodes simultaneously. However, it is not perfectly white color, often having, for example. blue tint. In RGBWW tapes, this problem is eliminated by equipping them with an additional diode that emits white light. IP20 LED tape IP20-rated LED strips are covered with a thin protective layer, which protects them from small contaminants. However, they do not have any additional protection, so they are not recommended in applications where increased moisture resistance is required. 300 LED 5050 SMD tape The 5050 diode is a diode with a larger size than the 3528 and 2835 diodes that are often seen. The density of LED strip included in the name of the product is nothing more than the number of LEDs mounted on one meter of LED strip.. The number of LEDs per meter of LED strip affects the uniformity of the light of the strip mounted in the LED profile. To achieve the sought-after effect of a uniform line of light, think about the densest possible LED strip, especially where the application is in a shallow LED profile, which may limit the dispersion of light emitted by the LEDs. The density of the tape also has a direct impact on the frequency of the marked cutting points of the LED tape. LED tapes with a density of 60 LEDs per meter are tapes in which it is possible to achieve uniform light. With the selection of the right profile and shade, you can achieve the effect of a line of light. Requires installation of power supply LED strips are light sources powered by low, so-called safe voltage. This means that in order to install an LED lighting system, we need a power supply that allows us to reduce the mains voltage to the voltage required by the product being installed. In the case of LED strips we are talking about 12V or 24V. When choosing a power supply, it is also necessary to calculate the power of the power supply, which is based on the length and power of the LED strip used. When selecting an LED power supply, after recalculating the power needed, it is good practice to increase the value by about. 10 % Requires installation of LED driver RGBWW LED strips need a LED driver to work properly. It is thanks to it that it is possible to select color parameters from the RGB color palette or change to warm white light. The controller is mounted behind the power supply, so it is important to choose the right voltage. Why choose a professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).