LED Labs

LED pásik PRO 3YB 24V 2835 SMD neutrálna biela, IP65HS, 12W, 600 LED diód., 5 m

Name: LED pásik PRO 3YB 24V 2835 SMD neutrálna biela, IP65HS, 12W, 600 LED diód., 5 m
Brand: LED Labs

3Y Basic LED strips feature a 3-year warranty period. LED strips of this series are embedded on a 2oz copper PCB substrate. The LED tape comes with double-sided Blue Tape mounting tape. Neutral white color LED tape designed to be used as an element of the main room lighting, for the construction of LED fixtures, to illuminate exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. LED strips 24V - lower voltage drops LED strip intended for use as part of the main lighting of rooms, for the construction of LED fixtures, to highlight exhibitions and store windows or kitchen worktop. Neutral light is not as strenuous on the eyes as cold color, but allows you to get much more light than with warm color. It is closest to daylight, so it allows relatively best color rendering of objects. Thanks to its versatility, it fits virtually any style of room. It will work well as a main light, over a kitchen countertop or as a work light in an office. See the colors in their natural shades High CRI value guarantees the highest color quality of illuminated objects. The higher the value of the parameter, the more natural the appearance of the objects. The use of tape with a CRI of more than 80 allows to reflect the true color of objects in the room where the LED tape was used. Tape 600 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. It is a more powerful alternative to the 3528 LED. The density of LED strips indicates the number of LEDs per meter of LED strip.. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more LEDs the more often we can cut the tape. LED tapes with a density of 120 LED/m are tapes that allow you to get uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. LED strip for use in areas exposed to moisture Often an increase in the degree of waterproofness is accompanied by a decrease in the brightness of the LED strip. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a shrink wrap was used to tightly cover the tape. This makes it possible to maintain IP65 waterproofing and high light performance of the LED strip. Requires the installation of a power supply LED strips are powered by low, safe voltage. To connect them you need a power supply. The choice of power supply depends on the parameters of the LED strip. Tapes on 24V need a power supply with an output voltage of 24V.Another important aspect is the appropriate power. The power of the power supply must be adapted to the power and length of the tape to be mounted. If a section of LED strip is 5m long, the power of the LED strip should be multiplied times 5. It's worth adding a 10% power reserve. We offer furniture, hermetic or slim power supplies: their choice depends on the place of installation.