LED Labs

LED pásik PRO 3YB 2835 SMD studená biela, 12W, 600 LED diód, 5 m

Name: LED pásik PRO 3YB 2835 SMD studená biela, 12W, 600 LED diód, 5 m
Brand: LED Labs

3Y Basic LED strips feature a 3-year warranty period. LED strips of this series are embedded on a 2oz copper PCB substrate. The LED tape comes with double-sided Blue Tape mounting tape. Cold white color The light of the tape with a cold white color introduces a glow in a shade close to blue. The cold color stimulates the body to work and is a good solution in places where focus is required. It can be used in doctor's offices, markets or as advertising backlights. IP20 LED strip Often an increase in the degree of waterproofness is accompanied by a decrease in the brightness of the LED tape. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a shrink wrap was used to tightly cover the tape. This makes it possible to maintain IP65 waterproofing and high light performance of the LED strip. See the colors in their natural shades Vivid colors in your home, thanks to the tape with high CRI. The indicator shows the difference between the color of the illuminated object and its color in natural light. The higher the parameter, the more natural the colors are. CRI >80 means better appearance of food, clothing and other items. 600 LED 2835 SMD tape The 2835 diode - is an energy-saving diode with a small size. It is a more powerful alternative to the 3528 LED. The density of LED strips indicates the number of LEDs per meter of LED strip.. The number of LEDs has a key effect on the presence of beads in LED strips, or visible points of light. The higher the density (the more LEDs there are on a meter of tape), the more uniform the light is, creating the effect of the so-called "light".. lines of light. The number of LEDs also affects the cutting section of LED strips. The more LEDs the more often we can cut the tape. LED tapes with a density of 120 LED/m are tapes that allow you to get uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires a low 12V DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.