LED Labs

LED strip PRO 5Y 24V 320 LED 2835 SMD 6W 10000K RA90, 5 m

Name: LED strip PRO 5Y 24V 320 LED 2835 SMD 6W 10000K RA90, 5 m
Brand: LED Labs

LED 5Y strips are covered by up to 7-year warranty! They are characterized by a low dispersion of color temperatures (at the level of 3 SDCM). This means that the human eye does not notice differences in the color temperature of individual LEDs. This gives the effect of uniform light color along the entire length of the tape. CRI color rendering index (>90) and 3oz PCB backing, allows for perfect color reproduction and lower voltage drops. They feature Tesa 4965 mounting tape. Ultra cold white color Ultra cold color tape is used as decorative lighting. It is often used to highlight elements we want to draw attention to when designing LED lighting in rooms. Used to illuminate paintings, the interior surface of bars or advertising elements. IP20 LED strip IP20 LED strips, although they do not have a silicone cover, are covered with a thin protective layer. It serves as an insulator that protects the product from small contaminants. The tape is used in areas where there is no need for waterproof products. See the colors in their natural shades The CRI value ranges from 0 to 100. Value of 100 means color reproduction at the level of natural daylight. Most LED products have a CRI rating of 80, which can be considered suitable for indoor use. Level 90 and above allows for near-perfect color reproduction and will perform well even in the most demanding places. 320 LED 2835 SMD tape The 2835 diode - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to density, the incidence of beads is influenced by the height of the profile in which the tape is placed and the lampshade. Tapes with a density of 64 LED/m are tapes that allow for uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED tapes. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Requires installation of a power supply LED tape requires a low DC 24V power supply.To power the tape from the mains, the installation of a power supply is required. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply.