LED Labs

LED páska PRO 3Y 24V 2835 SMD teplá biela, IP20, 12W, RA90 700 LED., 5 m

Name: LED páska PRO 3Y 24V 2835 SMD teplá biela, IP20, 12W, RA90 700 LED., 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape of this series is equipped with Blue Tape mounting tape. Warm white color Warm white color, thanks to its pleasant light similar to that of traditional incandescent lamps, is a solution suitable for installation in rooms intended for leisure and daily activities. Warm white light is not associated with the cold lighting characteristic of offices, making it possible to relax and unwind. IP20 LED strip IP20 tapes are covered only with a thin layer of varnish. This does not protect against water or dust, but it does provide protection against water vapor. The absence of a silicone cover allows for better heat dissipation, which extends the life of the LED strip. LED strips 24V - lower voltage drops The choice of LED strips with 24V drive is a solution increasingly chosen by professionals. Thanks to the use of higher voltage, the designed LED lighting system allows you to lay longer sections of LED tape without the risk of voltage drops at the ends of the tape sections. Thanks to lower current consumption, 24V LED strips also allow the use of smaller wires, which can be helpful in designing installations. This allows the wires to be more easily hidden. LED 24V strips are increasingly popular in the market. See the colors in their natural shades The CRI parameter determines how the light reflects the colors of the illuminated object, allowing them to be perceived in the most natural way, similar to how they appear when exposed to daylight emission. We measure the CRI parameter in the range between 0 and 100, assuming that the higher its value, the closer we are to the effect of daylight. The use of LED strips with a CRI above 80 allows for more natural and pleasant color reproduction on the illuminated objects. Tape 700 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light you will get. Tapes with a density of 140 LED/m allow you to get a uniform line of light. To ensure that the light beads are not visible, it is recommended to install the profile together with a suitable lampshade. Requires installation of a power supply LED strip requires 24V low DC power supply. For the tape to be powered from the mains, it is necessary to install a power supply. The choice of power supply depends on the parameters of the tape. The first is the tension. It is important that the output voltage of the power supply is the same as the voltage of the LED strip. The power supply must be properly selected due to the power of the tape. The power referred to 1 meter should be multiplied times the length of the tape in meters. It's worth adding a 10% power reserve. Based on the mounting location, you can choose a slim power supply, a waterproof hermetic power supply or a furniture power supply. Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).