LED Labs

PRO 3Y 24V 300 LED 5050 SMD 14.4W RGB tape, 5 m

Name: PRO 3Y 24V 300 LED 5050 SMD 14.4W RGB tape, 5 m
Brand: LED Labs

LED tapes offered by our company have a wide range of possibilities for functional, yet comfortable installation of attractive interior design. Professional LED tapes are characterized by high energy efficiency, effectiveness and the ability to create a unique visual effect, which have all kinds of applications. From decorative lighting through main lighting in the living room, room, kitchen, bathroom to professional lighting in offices or markets. RGB LED tape RGB LED tape is a basic variant of color-changing tapes. With its wide spectrum of colors, it is often used as club or restaurant lighting to create the right character for places. It can be successfully used as stylish overhead lighting, lighting behind the TV or under the bed. IP20 LED strip IP rating is an important parameter if the LED strip is to be installed in areas exposed to moisture. It informs about the degree of waterproofness. The higher the value of the parameter, the higher the protection against water. LED strips 24V - lower voltage drops Longer light installations do not have to be associated with voltage drops. Choosing 24V LED strips means you can use longer lengths of LED tape. This is due to the lower power consumption, compared to a 12V installation. It also allows the use of smaller cross-sections of wires needed for installation, making them easier to hide. Tape 300 LED 5050 SMD The 5050 diode is a larger size than the 3528 and 2835 diodes that are often found. Increased size allows for greater light emission. Often used as functional lighting, such as. When illuminating the bathroom mirror. strips with a density of 60 LEDs per meter allow for a uniform line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).