LED Labs

Páska PRO 3Y 12V 300 LED 2835 SMD 4,8W WW RA90 HS, 5 m

Name: Páska PRO 3Y 12V 300 LED 2835 SMD 4,8W WW RA90 HS, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape of this series is equipped with Blue Tape mounting tape. Warm white color Warm white color, thanks to its pleasant light similar to that of traditional incandescent lamps, is a solution suitable for installation in rooms intended for leisure and daily activities. Warm white light is not associated with the cold lighting characteristic of offices, making it possible to relax and unwind. IP65HS LED strip Often an increase in the degree of waterproofness is accompanied by a decrease in the brightness of the LED strip. The answer to this problem is the IP65HS tape. Instead of a thicker layer of silicone, a shrink wrap was used to tightly cover the tape. This makes it possible to maintain IP65 waterproofing and high light performance of the LED strip. See the colors in their natural shades CRI indicates how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 300 LED 2835 SMD LED 2835 - is an energy-saving diode of small size. This is a more powerful alternative to the 3528 diode. Density is one of the parameters that characterize LED tape. Indicates how many LEDs are placed on a meter of tape. The more LEDs there are on the LED strip, the more uniform the light emitted. This, in turn, makes it possible to nullify the phenomenon of beads, or points of light. In addition to the density, the incidence of beads is influenced by the height of the profile in which the tape and the lampshade are placed. Tapes with a density of 60 LEDs per meter make it possible to achieve a line of light. To ensure that the light points are not visible, it is recommended to use an LED profile along with a suitable lampshade. Requires the installation of a power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED strip