LED Labs

Tape PRO 3Y 12V 600 LED 2835SMD 9.6W UWW RA90-25m, 5 m

Name: Tape PRO 3Y 12V 600 LED 2835SMD 9.6W UWW RA90-25m, 5 m
Brand: LED Labs

LED 3Y tapes are a series of tapes with an increased warranty period. Warranty is 5 years for IP20 tapes and 3 years for IP65HS tapes. In addition, the tapes have lower voltage drops due to the 3oz copper backing. Equipped with Blue Tape mounting tape. Ultra warm white color Ultra warm white color is most similar to the light of traditional incandescent bulbs. Light sources of this color will be ideal in rooms used for rest and recreation. Warm light is used in homes and apartments, making rooms more cozy. IP20 LED strip IP20 LED strips are the most commonly used LED strips. Wherever there is no exposure to moisture and water, they are the choice to guarantee a long life. The lack of a cover to reinforce waterproofing affects the better dissipation of heat from the LED strip, which translates into the life expectancy of the LED strip. LED strip in IP20 waterproof strips can perfectly cope with dust and dry dirt thanks to the protective layer coating the LEDs. See the colors in their natural shades CRI tells you how the colors of the illuminated object are rendered. The higher the value, the more natural the objects look. Naturally, that is, as if they were lit by daylight. The use of tape with a CRI of more than 90 allows to reflect the true color of objects in the room where the LED tape was used. Tape 600 LED 2835 SMD LED 2835 - is an energy-saving diode with a small size. This is a more powerful alternative to the 3528 diode. The visible points of light in the LED strip are the result of the spot arrangement of LEDs. The more LEDs there are on the tape, the more uniform light you will get.LED tapes with a density of 120 LED/m are tapes that allow you to get uniform light. When choosing the right lampshade and profile, you can achieve the effect of a line of light. Requires installation of power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Requires installation of LED driver A driver is required to install the CCT LED strip