LED Labs

Páska PRO 3Y 24V 150LED 5050 SMD 7,2W RGB IPHS, 5 m

Name: Páska PRO 3Y 24V 150LED 5050 SMD 7,2W RGB IPHS, 5 m
Brand: LED Labs

The 3Y LED strips are PCB backed strips with 3oz copper content, which reduces voltage drops. Tapes come with an extended warranty (5 years for IP20 tapes and 3 years for IP65HS tapes). Each tape of this series is equipped with Blue Tape mounting tape. RGB LED Tape RGB LED tapes allow you to achieve lighting from the RGB color palette. This means that by choosing this type of tape, we can get any color of light. RGB tape is often used for decorative lighting, as gaming lighting or media wall backlighting. RGB LED strips require the installation of an LED driver. IP65HS LED strip LED strips IP65HS are covered with a heat-shrinkable band, which under the influence of temperature tightly covers the LED strip.. Such a cover allows for increased waterproofing while maintaining high light performance. Increased waterproofing is achieved through the use of a thin band layer, which usually translates into higher lumen output and greater color uniformity than analogous IP65 tapes. LED strips 24V - lower voltage drops Thanks to the voltage of 24V, we can connect up to twice as long sections of LED tape when connecting in series than is the case with 12V LED strips. This is due to lower power consumption. Lower current consumption, also will translate into a smaller cross-section of wires needed for installation, making it much easier to hide them during installation. Tape 150 LED 5050 SMD The 5050 diode is a diode with a larger size than the 3528 and 2835 diodes often seen. Increased size allows for greater light emission. Often used as functional lighting, such as. When lighting a bathroom mirror. LED strips with a density of 30 LEDs per meter draw less current than strips built on the same LEDs, but with a higher density. Tape is more energy efficient, but there may be a bead phenomenon. Tape recommended for installation in hidden spaces. Requires installation of power supply LED strip requires installation of power supply. When choosing a power supply, you should be guided by the output voltage (it must be the same as the voltage of the LED strip), the mounting location and the wattage. The power of the power supply depends on the power and the length of the LED strip section. The power of the tape should be multiplied times its length. We recommend adding a 10% provision to the calculated power supply. Why choose the professional version of LED tape ? Professional LED tapes are a product proven and thoroughly tested in our photometric laboratory. Many years of experience in the lighting industry has allowed us to work out the important details of high quality LED tape and its long life. Professional tapes, unlike Standard tapes, are characterized by a higher luminous flux, so that despite the use of the same power of LED tape, the light output of a professional tape can be up to half that of a Standard tape. An additional advantage of using a professional tape is that the life of the tape is more than twice as long. Another advantageous feature of professional tapes is their repeatability. The selection of LEDs is at a much higher level, so we can get a uniform color along the entire length of the tape (+- 10%).